June 19, 2003 -  396 whp & 343 lb-ft torque at 22 psi on 93 octane pump gas

My first trip to Alamo's new AWD dyno at their Arlington, Texas, facility yielded good results.  I drove-in running 16 psi and putting about 315 HP to the wheels.  A few hours later, I was able to increase 16 psi output to 330 HP, and an additional 81 WHP with an additional 6 psi and some more tuning.  Not bad for a couple hours work.

All runs were made in 2nd gear and with Shell 93 octane super unleaded.

Return to The Shuttle's Dyno Results page