Welcome to TurboCelica.com..
of The Shuttle...
Navigation Menu
Home   The Cars   The Humor   Contact Me  

Visitor Number
Hit Counter

Chris' '90 Toyota Celica All-Trac Turbo (aka "The Shuttle")
Exhaust System
Updated: September 25, 2017

The exhaust system consists of a turbo header, and a complete 3" exhaust from down-pipe to muffler. Everything was fabricated by the folks at Alamo Autosports.  Several v-bands were utilized at convenient points to section the exhaust pipe into manageable pieces.  Everything in front of the flexi joint, which is directly under the rear transmission mount, was ceramic coated.  We also fabricated a "test" pipe to replace the Random Technologies 3" catalytic converter, on those special occasions. 

The turbo header is well documented in the link above, however, photos of the down-pipe and remainder of the exhaust system are posted below.

3" Down-pipe with wastegate dump    

From down pipe to just under the engine

Frontal view of exhaust over the cross-member

Looking at exhaust from rear of cross-member

Flexi is placed just behind the transmission

Down-pipe to the flexi is ceramic coated

cat "test" pipe - for testing purposes only

View of the muffler from underneath

This site is best viewed at 1024x768.  All information provided on www.turbocelica.com is provided without any expressed or implied warranty.  It is the responsibility of each visitor to determine the suitability of this information for your specific application.